Image above does not reflect any upgrades Scroll cursor over above image for more information (NOT DRAWN TO SCALE)
Fixed Panel
Return Panel
Fixed Panel
Return Panel
* Above measurements is an approximate calculation and should only be used as a guideline. Silicon beading has not been factored into the calculations of the above measurements, 3mm silicon beading is recommended.
Scroll cursor over above image for more information (NOT DRAWN TO SCALE)
Glass panels are cut square so you need to check that you walls are plumb and floors are level within a 5mm tolerance, find out more information here.
Wall tiles must be from floor to ceiling or there must at least have wall tiles up to the height of the screen because the position of fittings are set.
Wall Brackets
L-Shaped wall brackets.
Used to attached glass panels to the wall.
Glass has pre-drilled holes for brackets.
Wall brackets positioned: - 200mm from the top & - 227mm from the bottom
Screw and plug included.
Finish: Chrome
[Included in Price] (2x Wall Brackets)
Corner Brackets
L-Shaped corner brackets.
Used to attached two glass panels at a 90° corner angle.
Finish: Chrome
[Included in Price] (2x Corner Brackets)
Floor Brackets
Floor Bracket (0x Floor Bracket)
[Not Included in Price]
Add Extra Floor Brackets (2x Floor Brackets)
[add $24.00]
U-Shaped floor bracket.
Bracket measures 30mm x 30mm x 18mm.
The floor bracket will raise the glass panel by approximately 4mm when installed.
Used to secure glass panel to the floor.
Finish: Chrome
Setting Blocks
Setting Blocks (0x Packs)
[Not Included in Price]
Add Setting Blocks (1x Pack)
[add $5.00]
Setting blocks are essential for a frameless shower screen installation to be successful.
Provides a cushion for the glass panel to sit on and support the panels weight.
Glass edges are prevented from touching the tiles because the setting block ensures there is the correct glass-to-tile spacing. The glass edge should never come in contact with any hard surface.
Recommended for DIY installations or if your installer does not have his own setting blocks.
Assorted Pack of 5
3.2mm thick x 12mm wide x 50mm length (3pcs)
10mm thick x 12mm wide x 50mm length (2pcs)
NOTE: All Yss approved third-party installers have their own setting blocks.
Premium Quality Grade 'A' Toughened Safety Glass
The shower screen glass panels is made from premium quality Grade A toughened glass.
This shower screen complies with the Australian Standards AS1288 for design and complies with the Australian Standards AS2208 for toughened grade A safety glass quality.
Material: 8mm thick Clear Toughened Grade A Safety Glass
Packaging Weight & Size
Package
Length
Width
Height
Weight
Panel 1 of 2
210 cm
40 cm
5 cm
15 kg
Panel 2 of 2
210 cm
100 cm
5 cm
45 kg
Box of Fittings
10 cm
10 cm
5 cm
1 kg
(actual product may vary slightly from illustrated pictures)
