 |
| Image above does not reflect any upgrades
Scroll cursor over above image for more information
(NOT DRAWN TO SCALE) |
↑4mm Gap Gap of 4mm is recommended, however this gap is adjustable up to ±1mm. ← 4mm Gap Gap of 4mm is recommended which is adjustable between 3mm to 5mm.  * Above measurements is an approximate calculation and should only be used as a guideline. Silicon beading has not been factored into the calculations of the above measurements, 3mm silicon beading is recommended. Above measurements will change based on the amount of spacing allowed between door and hinged panels, a gap of 4mm is recommended, however this gap is adjustable up to ±1mm. Above measurements will change based on the amount of spacing allowed between panels, a gap of 4mm is recommended, however the gap is adjustable between 3mm to 5mm. Scroll cursor over above image for more information
(NOT DRAWN TO SCALE) |
| Image above does not reflect any upgrades
(NOT DRAWN TO SCALE) |
- 1x Door Panel
- 1x Hinged Panel
- 1x Return Panel
| - 1x Handle
- 2x Hinges
- 4x Wall Brackets
| | - 1x PVC Water Seal
- 1x Waterbar
|
Installation Requirements
- The door must be installed on a 45 degree angle. If an arbitrary angle is required, you will need to de-spring the hinges.
Hinges
- Spring-loaded, glass-to-glass hinges.
- Self centering action from about 25°.
- Pivots 90° in both directions, a total of 180°.
- Glass has pre-set cutouts for hinges.
- Finish: Chrome
[Included in Price]
(2x Hinges) |  | |
|  | |
Wall Brackets
- L-Shaped wall brackets.
- Used to attached glass panels to the wall.
- Glass has pre-drilled holes for brackets.
- Wall brackets positioned:
- 200mm from the top &
- 227mm from the bottom
- Screw and plug included.
- Finish: Chrome
[Included in Price]
(4x Wall Brackets) |  | |
Floor Bracket Options
|
- U-Shaped floor bracket.
- The floor bracket will raise the glass panel by approximately 4mm when installed.
- Used to secure glass panel to the floor.
- Finish: Chrome
|  | |
Shelf and Bracket Fixing Options
|
- Shelf measures 240mm x 240mm.
- Shelves are stylish and makes a great addition to your shower screen. It provides additional strength and stability to the hinged panel, and it gives a useful place to put all your shower products.
- Material: 10mm thick Clear Toughened Grade A Safety Glass
|
|  | |
- Bracket measures 30mm x 25mm x 16mm.
- For easy installation of the shelf.
- Recommended for DIY installations.
- Finish: Chrome
|
|  | |
Waterbar
- Waterbars are excellent for flat or level bathroom floor, without a fall to waste or hob.
- It is siliconed to the floor.
- Provides a barrier to stop water flowing out.
- Material: Silver Anodized Aluminum
[Included in Price]
(1x Waterbar) |  |  |
Setting Blocks
|
- Setting blocks are essential for a frameless shower screen installation to be successful.
- Provides a cushion for the glass panel to sit on and support the panels weight.
- Glass edges are prevented from touching the tiles because the setting block ensures there is the correct glass-to-tile spacing. The glass edge should never come in contact with any hard surface.
- Recommended for DIY installations or if your installer does not have his own setting blocks.
- Assorted Pack of 5
- 3.2mm thick x 12mm wide x 50mm length (3pcs)
- 10mm thick x 12mm wide x 50mm length (2pcs)
- NOTE: All Yss approved third-party installers have their own setting blocks.
|  |
Support Bar System (Sold Separately)
- Support bar systems are an excellent way to add structural strength to frameless shower screens.
- It's stylish and modern design keeps the open space feeling that frameless shower screens create in your bathroom.
- Support bar systems are excellent addition to the frameless shower screens for family with children, as it will greatly increase the safety factor.
- Finish: Chrome
Support Bars Sold Separately |  |
Premium Quality Grade 'A' Toughened Safety Glass
- The shower screen glass panels is made from premium quality Grade A toughened glass.
- This shower screen complies with the Australian Standards AS1288 for design and complies with the Australian Standards AS2208 for toughened grade A safety glass quality.
- Material: 10mm thick Clear Toughened Grade A Safety Glass
| Package | Length | Width | Height | Weight |
| Panel 1 of 3 | 210 cm | 70 cm | 5 cm | 30 kg |
| Panel 2 of 3 | 210 cm | 70 cm | 5 cm | 30 kg |
| Panel 3 of 3 | 210 cm | 70 cm | 5 cm | 30 kg |
| Box of Fittings | 25 cm | 25 cm | 15 cm | 5 kg |
(actual product may vary slightly from illustrated pictures)
