(02) 9437 1603
Home|Contact Us|Get a Quote|Trade Prices|Hot Deals
Frameless Corner Sliding Door Shower Screen
25% OFF

1010~1050 x 1010 x 2070h Corner Sliding Door

Frameless Shower Screen
$727.50 (incl GST)
save $242.50
was $970.00
$410.00 (incl GST)
Need a shower screen installer?
We can email you a shortlist of professional
installers to choose from who will do the job.
conditions apply
Pick Up:Artarmon, NSW
Stock Available
[ 668 sold ]
Sliding System Diagram Provided
Installation Manual Not Available

Got Questions about Installation?
Ask our technicians, they'll be able to assist you.
Enter Postcode
[Included in Price]
Matte Black
[add $20.00]
Frameless Shower Screen - HE Corner Sliding Shower Screen Model | sliding showerscreen
Fixed Panel
Door Panel
Return Panel
50mm ~ 10mm

22mm between
Door & Fixed
Door Opens
Fixed Panel
Return Panel
Door Panel
Door Closes

* Above measurements is an approximate calculation and should only be used as a guideline. Silicon beading has not been factored into the calculations of the above measurements, 3mm silicon beading is recommended. Overlap between door and fixed panels have an overlap which is adjustable between 50mm to 10mm.

Scroll cursor over above image for more information

Image above does not reflect any upgrades

Package Includes
  • 1x Door Panel
  • 1x Fixed Panel
  • 1x Return Panel
  • 1x Handle
  • 2x Door Rollers
  • 1x Door Guide
  • 1x Fixed Panel Rail Clip
  • 1x Return Panel Rail Clip
  • 2x Stoppers
  • 1x Wall Mount
  • 1x Rail End Cap
  • 1x Rail
  • 4x Wall Brackets
  • 1x PVC-A 2000mm
  • 1x PVC-NF 2000mm
  • 1x Waterbar
Glass Type Dimensions Heights
Clear Safety Glass
10mm Thick
1010mm ~ 1050mm x 1010mmTotal Height: 2070mm
Glass Height: 2000mm
Entrance WidthGap Between Door & Fixed Panels Layout Reversible
430mm ~ 470mmDoor Panel Slides Behind the Fixed Panel
The Gap Between Door & Fixed Panels is 22mm
Finishing on HardwareCertified Product Warranty
ChromeAS1288 & AS2208 One Year
Installation Requirements
  • Glass panels are cut square so you need to check that you walls are plumb and floors are level within a 5mm tolerance, find out more information here.
  • Wall tiles must be from floor to ceiling or there must at least have wall tiles up to the height of the screen because the position of fittings are set.
  • You need a minimum of 50mm of flat level floor for the fixed panel and door to be installed, the fixed panel and door cannot be installed on different elevations of 3mm or more.
  • You need to leave a minimum of 20mm buffer before the back edge of the door hits the wall.
  • You need to be able to securely screw the rail into the wall.
  • Not suitable to be installed with a linear grate drain.
  • Not suitable to be installed on top of a bathtub.
Sliding Shower Screen System
  • 1x Door Handle
  • 2x Door Rollers
  • 2x Door Stoppers
  • 1x Fixed Rail Clip
    (fixed panel to rail clip)
  • 1x Return Rail Clip
    (return panel to rail clip)
  • 1x Wall Mount
    (wall to rail clip)
  • 1x Door Guide
    (bottom track for door)
Wall Brackets
  • L-Shaped wall brackets.
  • Used to attached glass panels to the wall.
  • Glass has pre-drilled holes for brackets.
  • Wall brackets positioned:
      - 200mm from the top &
      - 227mm from the bottom
  • Screw and plug included.
  • Finish: Chrome

[Included in Price]
(4x Wall Brackets)
  • Water bars are excellent for flat or level bathroom floor, without a fall to waste or hob.
  • It is siliconed to the floor, inline with the fixed panel and underneath the door.
  • Provides a barrier to stop water flowing out underneath the door.
  • Finish: Chrome

[Included in Price]
(1x Waterbar)
PVC Water Stopper NF-Profile
  • NF-Shaped PVC water stopper profile.
  • Attach to the side of the door panel to stops water from splashing out between the sliding door panel.
  • The diagram (below) illustrates how this profile is to be attached to the side of a door panel.

  • Material: Hard PVC plastic and Soft Vinyl lip

[Included in Price]
(1x PVC Water Seal)
PVC Water Stopper A-Profile
  • A-Shaped PVC water stopper profile.
  • Attach to the side of the door panel to stops water from splashing out.
    Also cushions the impact when closing the door.
  • The diagram (below) illustrates how this profile is to be attached to the side of a door panel.

  • Material: Hard PVC plastic and Soft Vinyl lip

[Included in Price]
(1x PVC Water Seal)
Setting Blocks
Setting Blocks
(0x Packs)
[Not Included in Price]
Add Setting Blocks
(1x Pack)
[add $5.00]
  • Setting blocks are essential for a frameless shower screen installation to be successful.
  • Provides a cushion for the glass panel to sit on and support the panels weight.
  • Glass edges are prevented from touching the tiles because the setting block ensures there is the correct glass-to-tile spacing. The glass edge should never come in contact with any hard surface.
  • Recommended for DIY installations or if your installer does not have his own setting blocks.
  • Assorted Pack of 5
  • 3.2mm thick x 12mm wide x 50mm length (3pcs)
  • 10mm thick x 12mm wide x 50mm length (2pcs)
  • NOTE: All Yss approved third-party installers have their own setting blocks.
EnduroShield DIY Glass Treatment Kit
No Glass Treatment
(0x Packs)
[Not Included in Price]
EnduroShield DIY Kit 125ml
(1x Pack)
[add $65.00]
  • EnduroShield DIY Glass Treatment Kit 125ml
  • You can apply it with no experience.
  • Simple spray & wipe solution takes minutes to apply & cuts cleaning time by up to 90%.
  • Each pack contains everything you need including cleaner and polishing pad.
  • Simply clean the glass with the pre-treatment cleaner included.
  • Apply the EnduroShield protective layer and wait for it to dry.
  • Treats up to 8 sqm's or 2 average size showers screens.
Premium Quality Grade 'A' Toughened Safety Glass
  • The shower screen glass panels is made from premium quality Grade A toughened glass.
  • This shower screen complies with the Australian Standards AS1288 for design and complies with the Australian Standards AS2208 for toughened grade A safety glass quality.
  • Material: 10mm thick Clear Toughened Grade A Safety Glass
Packaging Weight & Size
Panel 1 of 3210 cm60 cm5 cm25 kg
Panel 2 of 3210 cm65 cm5 cm28 kg
Panel 3 of 3210 cm115 cm5 cm51 kg
Box of Fittings25 cm25 cm15 cm5 kg
(actual product may vary slightly from illustrated pictures)
Product Warranty
12 Months Warranty[Included in Price](read)

2 Years Warranty[add $100.00](read)

3 Years Warranty[add $150.00](read)

5 Years Warranty[add $195.00](read)

10 Years Warranty[add $295.00](read)
Payment Options
VISA, MasterCard, AMEXLearn More
PayPalLearn More
Returns and Exchange Policy
Faulty Products
You are entitled to a refund, exchange, or repair depending if the product fault results from a major or non-major failure (read)
Non-Faulty Products
Conditions :Refund or Exchange will only be accepted if:
  • the product is returned within 21 days from the date of dispatch or collection
  • the product has not been used or you have not attempted to install the product
  • the product and packaging is not damaged
  • the product is not: a special order, a clearance item, or a TNT-FedEx freighted item

Refunds :A 15% (or $30 whichever greater) administration and handling fee applies to the refunded amount
[this fee is waived if you elect to receive store credits]
  • the product is to be returned to our warehouse at your own cost
  • refund applies to the purchased price of the product
  • freight or postage is non-refundable

* An additional $10 administration and handling fee for refunds with a discounted delivery offer

Exchanges :Exchanges will be given as: store credits
  • the product is to be returned to our warehouse at your own cost
  • store credits applies to the purchased price of the product
  • store credits does not apply for freight or postage
Back to Top
(02) 9437 1603
CLOSED - open at 9am (AEST)