Image above does not reflect any upgrades Scroll cursor over above image for more information (NOT DRAWN TO SCALE)
Fixed Panel
Door Panel
Fixed Panel
50mm ~ 10mm Overlap ↓
10mm ~ 5mm Overlap ↓
↑ 33mm between Door & Fixed
← Door Opens
Fixed Panel
Fixed Panel
Door Panel
Door Closes →
Fixed Panel
Door Panel
Fixed Panel
50mm ~ 10mm Overlap ↓
10mm ~ 5mm Overlap ↓
↑ 33mm between Door & Fixed
Door Opens →
Fixed Panel
Fixed Panel
Door Panel
← Door Closes
Above base diagram is an approximate calculation and should only be used as a guideline. Silicon beading has not been factored into the calculations of the above measurements, 3mm silicon beading is recommended. Overlap between door and fixed panels have an overlap which is adjustable between 50mm to 30mm. Overlap between door and return panels have an overlap which is adjustable between 10mm to 5mm. The door slides behind the fixed panel, and there is a 33mm gap between the door and fixed panel.
Scroll cursor over above image for more information (NOT DRAWN TO SCALE)
Image above does not reflect any upgrades (NOT DRAWN TO SCALE)
Package Includes
1x Door Panel
1x Fixed Panel
1x Fixed Panel
1x Handle
2x Door Rollers
2x Door Pins
1x Door Guide
3x Fixed Panel Rail Clip
2x Stoppers
1x Wall Mount
1x Rail
4x Wall Brackets
1x PVC-F 2000mm
1x Waterbar
What's the difference between the HT and ST models?
Glass panels are cut square so you need to check that you walls are plumb and floors are level within a 5mm tolerance, find out more information here.
Wall tiles must be from floor to ceiling or walls must be tiled to the height of the screen because the position of fittings are set.
You need a minimum of 65mm of flat level floor for the fixed panel and door to be installed, the fixed panel and door cannot be installed on different elevations of 3mm or more.
You need to leave a minimum of 20mm buffer before the back edge of the door hits the wall.
You need to be able to securely screw the rail into the wall.
Not suitable to be installed with a linear grate drain.
Not suitable to be installed on top of a bathtub.
Sliding Shower Screen System
1x Door Handle
2x Door Rollers
2x Door Stoppers
3x Fixed Rail Clip (fixed panel to rail clip)
1x Wall Mount (wall to rail clip)
1x Door Guide (bottom track for door)
Wall Brackets
L-Shaped wall brackets.
Used to attached glass panels to the wall.
Glass has pre-drilled holes for brackets.
Wall brackets positioned: - 200mm from the top & - 200mm from the bottom
Screw and plug included.
Finish: Chrome
[Included in Price] (4x Wall Brackets)
Waterbar
Water bars are excellent for flat or level bathroom floor, without a fall to waste or hob.
It is siliconed to the floor, inline with the fixed panel and underneath the door.
Provides a barrier to stop water flowing out underneath the door.
Finish: Chrome
[Included in Price] (1x Waterbar)
Water Stopper Seal, F-Shape for Vertical Side of Door Panel
Vertical PVC Seal (1x PVC10-F 2000mm)
[Not Included in Price]
Extra Vertical PVC Seal (2x PVC10-F 2000mm)
[add $10.00]
F-Shape PVC water stopper profile.
Attached to vertical side of a door or fixed panel, it prevents water from splashing out through the gap between panels.
The diagram (below) illustrates how this profile is to be attached to the side of a panel.
Material: Hard PVC plastic and Soft Vinyl lip
Setting Blocks
Setting Blocks (0x Packs)
[Not Included in Price]
Add Setting Blocks (1x Pack)
[add $5.00]
Setting blocks are essential for a frameless shower screen installation to be successful.
Provides a cushion for the glass panel to sit on and support the panels weight.
Glass edges are prevented from touching the tiles because the setting block ensures there is the correct glass-to-tile spacing. The glass edge should never come in contact with any hard surface.
Recommended for DIY installations or if your installer does not have his own setting blocks.
Assorted Pack of 5
3.2mm thick x 12mm wide x 50mm length (3pcs)
10mm thick x 12mm wide x 50mm length (2pcs)
NOTE: All Yss approved third-party installers have their own setting blocks.
Simple spray & wipe solution takes minutes to apply & cuts cleaning time by up to 90%.
Each pack contains everything you need including cleaner and polishing pad.
Simply clean the glass with the pre-treatment cleaner included.
Apply the EnduroShield protective layer and wait for it to dry.
Premium Quality Grade 'A' Toughened Safety Glass
The shower screen glass panels is made from premium quality Grade A toughened glass.
This shower screen complies with the Australian Standards AS1288 for design and complies with the Australian Standards AS2208 for toughened grade A safety glass quality.
Material: 10mm thick Clear Toughened Grade A Safety Glass
Packaging Weight & Size
Package
Length
Width
Height
Weight
Panel 1 of 3
210 cm
70 cm
5 cm
30 kg
Panel 2 of 3
210 cm
75 cm
5 cm
33 kg
Panel 3 of 3
210 cm
50 cm
5 cm
20 kg
Box of Fittings
25 cm
25 cm
15 cm
5 kg
(actual product may vary slightly from illustrated pictures)